Goguma Motion

Goguma Motion · Windows 10 / 11 · 64-bit

描きたいポーズを、
欲しい角度から。
Build the pose.
Find your drawing angle.

イラスト・漫画の作画資料を、自分でつくる3Dアプリ。キャラクターのポーズを調整し、小物とカメラを配置。作画ビューを選んで、PNGの参考画像として保存できます。

Make your own 3D drawing references for illustration and comics. Adjust a character's pose, arrange props and frame the shot. Choose a drawing view and save a PNG reference.

内蔵キャラクター4体ですぐに開始。定期課金・書き出しごとの料金なし。購入前に下の動作環境と対応モデルをご確認ください。

Start with four built-in characters. No subscription or per-export fee. Check system and model requirements below before buying.

こんな制作にWhat will you make?

イラストのポーズ資料Pose references

全身・部位別テンプレートと関節調整でポーズを作成。カメラと28種類の作画ビューから、描くときに使うPNGへ。

Combine pose templates and joint adjustments. Choose a camera angle and one of 28 drawing views, then save a PNG reference.

漫画・複数人の構図Comic composition

最大12体の人物と、椅子・テーブルなどの小物を配置。人物同士の距離、画面比率、カメラ位置を検討できます。

Arrange up to 12 characters with props such as chairs and tables. Plan character spacing, aspect ratio and camera position.

動きの参考・2DスプライトMotion & 2D sprites

内蔵の待機・歩き・走り90種やFBX/BVHを再生。動きの参考にしたり、方向・FPS・サイズを決めてスプライト画像へ。

Play 90 built-in idle, walk and run motions, or import FBX/BVH animation. Study movement or export sprites with your chosen directions, FPS and size.

作画資料ができるまでFrom pose to reference

  1. キャラクターを選ぶ。 内蔵キャラクター、または対応する自分のモデルを読み込みます。Choose a character. Start with a built-in character or load your own supported model.
  2. ポーズと構図を作る。 関節を調整し、小物を置いて、カメラと画面比率を決めます。Pose and frame. Adjust joints, add props, then set the camera and aspect ratio.
  3. PNGで保存する。 作画ビューを選び、イラスト・漫画の参考画像に。Save a PNG. Choose a drawing view and use the image as a reference.

実際の画面・動画・全機能をBOOTHで確認する →See screenshots, videos and the complete feature list on BOOTH →

購入前に確認したいことBefore you buy

必要なパソコンは?What computer do I need?

Windows 10/11(64bit)、x64・4コア以上、メモリ8GB以上、空き容量2GB以上。6コア・メモリ16GBを推奨します。GPUはVulkan対応を推奨し、D3D12/OpenGL 3.3では一部制限があります。詳細はBOOTHの商品説明をご確認ください。

Windows 10/11 (64-bit), x64 CPU with at least four cores, 8GB RAM and 2GB free storage. Six cores and 16GB RAM are recommended. A Vulkan-capable GPU is preferred; D3D12/OpenGL 3.3 have limitations. See BOOTH for the full requirements.

自分のキャラクターを使える?Can I use my own character?

GLB/glTF/FBX/VRMに対応。VRM 0.x/1.0のHumanoidボーン情報を利用しますが、MToon・揺れものには対応していません。特殊な体型・ポーズ・重ね着は手動調整が必要な場合があります。骨のない人型モデルの自動リギングも、適用前の確認・調整が必要です。

GLB, glTF, FBX and VRM are supported. VRM 0.x/1.0 humanoid bone data is used; MToon and spring bones are not supported. Unusual proportions, poses or layered clothing may need adjustment. Automatic rigging for unrigged humanoids also needs checking before applying.

書き出したものを商用利用できる?Can I use exports commercially?

作成・書き出した画像・動画・ポーズ・モーション・スプライト・モデルは、内蔵素材を含めて個人・商用利用できます。持ち込み素材は権利者の条件に従ってください。内蔵100STYLEを元にしたモーションデータを公開する場合は「100STYLE dataset — Ian Mason, CC BY 4.0」の表記が必要です。アプリ本体の再配布・転売・共有は禁止です。

Created/exported images, videos, poses, motions, sprites and models may be used personally or commercially, including built-in assets. Follow rights holders' terms for imported assets. Publishing motion data derived from built-in 100STYLE motions requires “100STYLE dataset — Ian Mason, CC BY 4.0”. Redistribution, resale and sharing of the app are prohibited.

写真・動画の自動解析やWebカメラ撮影は?Does it include photo/video analysis or webcam capture?

現在のBOOTH販売範囲には、写真のポーズ解析・画像からの構図自動作成・画像からの3D小物生成・動画からのモーション解析・Webカメラモーションキャプチャは含まれません。Goguma Rigの一括処理・CLI・MCPも別製品です。購入対象の機能はBOOTHの商品説明を基準にご確認ください。

The current BOOTH product does not include photo pose analysis, automatic composition from images, image-to-3D props, video-to-motion analysis or webcam motion capture. Goguma Rig batch processing, CLI and MCP are a separate product. Check the BOOTH listing for included features.

更新履歴Release notes

バージョンごとの変更点です。更新するときは、新しい ZIP を展開して以前のフォルダーに上書きしてください(新しいフォルダーに展開しても構いません)。設定・保存した作業・ダウンロード済みの AI 機能はそのまま使えます。

What changed in each version. To update, extract the new ZIP over your previous folder (or into a new folder). Your settings, saved work and downloaded AI features carry over.

以下は開発・更新の記録です。現在の販売内容・同梱範囲はBOOTHの商品説明をご確認ください。

This is a development and update history. Check the BOOTH listing for the currently sold product and included features.

  1. 0.9.111 2026年10月21日October 21, 2026 最新Latest

    書いた文章から動きを作れるようになりました。Make a motion from a sentence.

    新機能

    • 動作 › モーション › 「文章から」:させたい動きを書くと近い動きがすぐに出ます。ひとつ選んで長さ(1〜10秒)を決め、「動きを作る」で現在のキャラクターに適用
    • 日本語・英語・韓国語・中国語・スペイン語で入力できます(言語モデルは使わず、入力した文章はインターネットに送信されません)
    • 作った動きは普通のモーションと同じく、元に戻す・モーションバーでの編集・書き出しができます。作り直すと別の動きになります
    • 足の滑りを自動で補正(補正で滑りが減る動きだけに適用。28件のテストで平均約20%減り、悪化した動きはなし)
    初回のみ、タブの「AI機能を入手」から「文章 → モーション」(約0.84GB、AIエンジンが必要)を無料でダウンロードします。動きはこのPC上で NVIDIA Kimodo が作成します(NVIDIA のグラフィックカードを推奨)。
    既知の制限
    • 作れるのは、ひとりの人型キャラクターの全身の動き(最大10秒)です。椅子や箱などの物体は作られません
    • 動きの言葉が読み取れない文章では候補が出ません。「歩く」「座る」「手を振る」のような言葉を入れてください
    • 同じ文章でも、作るたびに動きが変わります

    New

    • Animation › Motion › “From text”: write what the character should do and the closest motions appear right away. Pick one, set the length (1–10 seconds) and press “Make motion” to apply it to the current character
    • Type in English, Japanese, Korean, Chinese or Spanish (no language model is used, and nothing you type is sent over the internet)
    • The result works like any other motion: undo, edit in the motion bar and export. Making it again gives a different take
    • Foot sliding is cleaned up automatically, only where it reduces sliding (about 20% less on average in a 28-motion test, none got worse)
    First time only: use “Get AI feature” in the tab to download “Sentence → motion” for free (about 0.84 GB, needs the AI engine). Motions are made on your PC by NVIDIA Kimodo (NVIDIA graphics card recommended).
    Known limitations
    • It makes full-body motion for one humanoid character, up to 10 seconds. Objects such as chairs or boxes are not created
    • A sentence without recognised motion words shows no candidates. Use words like walk, sit or wave
    • The same sentence gives a different motion each time
  2. 0.9.110 2026年10月21日October 21, 2026

    自動リギングした GLB が大きくなる問題を修正しました。Automatically rigged GLB files no longer grow.

    修正

    • 自動リギングした GLB が、リギングを繰り返すたびに大きくなる問題(54MB のモデルが 146MB、241MB と増えずに 54MB のまま)

    改善

    • コマンドラインの結果は --out にだけ保存します(マイアセットやアプリの作業フォルダーに残しません)
    • motion --out は .bvh / .glb / .poseloop だけを受け付け、それ以外は理由を表示します

    Fixed

    • Automatically rigged GLB files growing each time a model was rigged again (a 54 MB model stays 54 MB instead of becoming 146 MB, then 241 MB)

    Improved

    • Command-line results are saved only to --out (nothing is added to My assets or left in the app's working folder)
    • motion --out accepts only .bvh / .glb / .poseloop and explains why another extension is refused
  3. 0.9.109 2026年10月21日October 21, 2026

    コマンドラインが再び使えるようになりました。The command line is back.

    • Windows\GogumaMotion-cli.cmd で list・inspect・pose・motion・capture・gui・camera・prop・share・scene(結果は JSON 1行)
    • 自動リギングの rig コマンドを追加
    • capture --loop で外部モーションの指定時刻を画像で確認
    • コマンドラインの実行は、ライブラリ・最近使ったモデル・ウィンドウ設定を変更しません
    • Windows\GogumaMotion-cli.cmd runs list, inspect, pose, motion, capture, gui, camera, prop, share and scene (one line of JSON each)
    • New rig command for automatic rigging
    • capture --loop captures an external motion at a given time
    • Command-line runs do not change your library, recent models or window settings